Fusarium sporotrichioides Produces Two HT-2-α-Glucosides on Rice.

Fusarium is a genus that mostly consists of plant pathogenic fungi which are able to produce a broad range of toxic secondary metabolites. In this study, we focus on a type A trichothecene-producing isolate (15-39) of Fusarium sporotrichioides from Lower Austria. We assessed the secondary metabolite profile and optimized the toxin production conditions on autoclaved rice and found that in addition to large amounts of T-2 and HT-2 toxins, this strain was able to produce HT-2-glucoside. The optimal conditions for the production of T-2 toxin, HT-2 toxin, and HT-2-glucoside on autoclaved rice were incubation at 12 °C under constant light for four weeks, darkness at 30 °C for two weeks, and constant light for three weeks at 20 °C, respectively. The HT-2-glucoside was purified, and the structure elucidation by NMR revealed a mixture of two alpha-glucosides, presumably HT-2-3-O-alpha-glucoside and HT-2-4-O-alpha-glucoside. The efforts to separate the two compounds by HPLC were unsuccessful. No hydrolysis was observed with two the alpha-glucosidases or with human salivary amylase and Saccharomyces cerevisiae maltase. We propose that the two HT-2-alpha-glucosides are not formed by a glucosyltransferase as they are in plants, but by a trans-glycosylating alpha-glucosidase expressed by the fungus on the starch-containing rice medium.

ß-sitosterol isolated from the leaves of Trema orientalis (Cannabaceae) promotes viability and proliferation of BF-2 cells.

Trema orientalis is a pioneer species in the cannabis family (Cannabaceae) that is widely distributed in Thai community forests and forest edges. The mature leaves are predominantly used as an anti-parasite treatment and feed for local freshwater fish, inspiring investigation of their phytochemical composition and bioactivity. The purpose of this work was to investigate the bioactive compounds in T. orientalis leaf extract and their cytotoxicity in the BF-2 fish cell line (ATCC CCL-91). Flash column chromatography was used to produce 25 mL fractions with a mixture solvent system comprised of hexane, diethyl ether, methanol, and acetone. All fractions were profiled with HPLC-DAD (mobile phase methanol:aqueous buffer, 60:40 v/v) and UV detection (wavelengths 256 and 365 nm). After drying, a yellowish powder was isolated from lipophilic leaf extract with a yield of 280 µg/g dry weight. Structure elucidation by nuclear magnetic resonance (NMR) indicated it to consist of pure ß-sitosterol. The lipophilic extract and pure compound were evaluated for cytotoxicity using BF-2 cells. MTT assays showed both leaf extract and pure compound at 1 µg/mL to increase cell viability after 24 h treatment. The respective half maximal inhibitory concentration (IC50) values of leaf extract and ß-sitosterol were 7,027.13 and 86.42 µg/ml, indicating a lack of toxicity in the BF-2 cell line. Hence, T. orientalis can serve as a source of non-toxic natural lipophilic compounds that can be useful as bioactive ingredients in supplement feed development.

Profiling of historical rag papers by their non-cellulosic polysaccharide composition.

Hemicellulose and pectin are noteworthy components of historical European rag papers, and have not been studied in detail so far. Rag papers were made from used textiles, and fiber-based utilities, such as ropes and bags. These had been prepared until the mid-19th century from plant-based fibers. Their polysaccharide composition could relate to their condition and history. This information can be expected to hold importance for the preservation and conservation of historical objects. We investigated a collection of rag papers of different age for their composition of non-cellulosic polysaccharides, and compared the findings with modern rag papers and wood pulps. Furthermore, a non-destructive determination of the hemicellulose and pectin content by near-infrared spectroscopy was developed. Historical rag papers had a lower hemicellulose/pectin content than pulps; the fractions of rhamnose, galactose, and arabinose were higher, while xylose was lower. In modern rag papers, xylose tended to be at the higher end of the range, which suggests a degradation of hemicelluloses/pectin over time or a change in raw materials and manufacturing. Rag papers also showed higher crystallinity than wood pulp papers. These findings provide insights into rag paper characteristics and offer potential classification methods.

Antimicrobial, antioxidant, and sun protection potential of the isolated compounds from Spermacoce princeae (K. Schum).

BACKGROUND: Spermacoce princeae (K. Schum) has been used in the treatment of bacterial skin infections in Uganda. Pharmacological studies revealed that extracts of S. princeae exhibited antibacterial, antioxidant, and sun protection potential. This study aimed at isolating and identifying pure compounds from the extracts based on comprehensive analytical characterization by multiple analytical techniques. METHODS: The plant samples were extracted by sequential maceration using n-hexane, ethyl acetate, methanol, and distilled water. The compounds were isolated using a combination of chromatographic techniques and their structures were elucidated by multiple spectroscopic techniques. The antibacterial and antifungal activity determination of the isolated compounds was carried out using an agar well diffusion and potato dextrose assay against Pseudomonas aeruginosa, Staphylococcus aureus, Escherichia coli, Klebsiella pneumoniae, Candida albicans, and Aspergillus flavus while the antioxidant activity was screened with the 2,2-diphenyl-2-picryl-hydrazyl (DPPH) radical scavenging assay. The sun protection factor was determined using a Shimadzu Ultra Violet-visible (UV-VIS) double beam spectrophotometer between 290 to 320 nm. RESULTS: Eleven compounds; quercetin (1), kaempferol-3-O-rutinoside (2), rutin (3, 12), myo-inositol (4), asperulosidic acid (5), hexadecanoic acid (6), ß-sitosterol (7), stigmasterol (8), campesterol (9), ursolic acid (10), and ß-sitosterol glucoside (11) were identified in the S. princeae extracts. Compound 2 had good antifungal activity against C. albicans (zone of inhibition, 23.0 ± 0.1 mm). Compound 10 showed antibacterial and antifungal activity against S. aureus, P. aeruginosa, C. albicans, and A. flavus. Compound 2 had a good percentage radical scavenging effect (IC50 = 64.81 µg/ml) and a good sun protection factor (SPF = 26.83). CONCLUSION: This study reports the first-time isolation and identification of compounds 1 to 11 from S. princeae, which contribute to its antimicrobial, antioxidant, and sun protection potential.

Genome analysis of Cephalotrichum gorgonifer and identification of the biosynthetic pathway for rasfonin, an inhibitor of KRAS dependent cancer.

BACKGROUND: Fungi are important sources for bioactive compounds that find their applications in many important sectors like in the pharma-, food- or agricultural industries. In an environmental monitoring project for fungi involved in soil nitrogen cycling we also isolated Cephalotrichum gorgonifer (strain NG_p51). In the course of strain characterisation work we found that this strain is able to naturally produce high amounts of rasfonin, a polyketide inducing autophagy, apoptosis, necroptosis in human cell lines and showing anti-tumor activity in KRAS-dependent cancer cells. RESULTS: In order to elucidate the biosynthetic pathway of rasfonin, the strain was genome sequenced, annotated, submitted to transcriptome analysis and genetic transformation was established. Biosynthetic gene cluster (BGC) prediction revealed the existence of 22 BGCs of which the majority was not expressed under our experimental conditions. In silico prediction revealed two BGCs with a suite of enzymes possibly involved in rasfonin biosynthesis. Experimental verification by gene-knock out of the key enzyme genes showed that one of the predicted BGCs is indeed responsible for rasfonin biosynthesis. CONCLUSIONS: This study identified a biosynthetic gene cluster containing a key-gene responsible for rasfonin production. Additionally, molecular tools were established for the non-model fungus Cephalotrichum gorgonifer which allows strain engineering and heterologous expression of the BGC for high rasfonin producing strains and the biosynthesis of rasfonin derivates for diverse applications.

Debugging periodate oxidation of cellulose: Why following the common protocol of quenching excess periodate with glycol is a bad idea.

Periodate oxidation of cellulose to produce "dialdehyde cellulose" (DAC) has lately received increasing attention in sustainable materials development. Despite the longstanding research interest and numerous reported studies, there is still an enormous variation in the proposed preparation and work-up protocols. This apparently reduces comparability and causes reproducibility problems in DAC research. Two simple but prevalent work-up protocols, namely glycol quenching and filtration/washing, were critically examined and compared, resulting in this cautionary note. Various analytical techniques were applied to quantify residual iodine species and organic contaminations from quenching side reactions. The commonly practiced glycol addition cannot remove all oxidising iodine compounds. Both glycol and the formed formaldehyde are incorporated into DAC's polymeric structure. Quenching of excess periodate with glycol can thus clearly be discouraged. Instead, simple washing protocols are recommended which do not bear the risk of side reactions with organic contaminants. While simple washing was sufficient for mildly oxidised celluloses, higher oxidised samples were more likely to trap residual (per)iodate, as determined by thiosulfate titration. For work-up, simple washing with water is proposed while determining potential iodine contaminations after washing with a simple colorimetric test and, if needed, removal of residual periodate by washing with an aqueous sodium thiosulfate solution.

From liquid to solid-state, solvent-free oxidative ammonolysis of lignins - an easy, alternative approach to generate "N-lignins".

A new chemical modification protocol to generate N-lignins is presented, based on Indulin AT and Mg2+-lignosulfonate. The already known ammonoxidation reaction in liquid phase was used as a starting point and stepwise optimised towards a full solid-state approach. The "classical" liquid ammonoxidation products, the transition products from the optimization trials, as well as the "solid-state" products were comprehensively analysed and compared to the literature. The N-lignins obtained with the conventional ammonoxidation protocol showed the same properties as reported. Their molar mass distributions and the hydroxy group contents, hitherto not accessible due to solubility problems, were measured according to a recently reported protocol. N-Indulin showed an N-content up to 11 wt% and N-lignosulfonate up to 16 wt%. The transition experiments from liquid to solid-state gave insights into the influence of chemical components and reaction conditions. The use of a single chemical, the urea-hydrogen peroxide complex (UHP, "carbamide peroxide"), was sufficient to generate N-lignins with satisfying N-content. This chemical acts both as an N-source and as the oxidant. Following the optimization, a series of solid-state ammonoxidation tests were carried out. High N-contents of 10% in the case of Indulin and 11% in the case of lignosulfonate were obtained. By varying the ratio of UHP to lignin, the N-content can be controlled. Structural analysis showed that the N is organically bound to the lignin, similar to the "classical" ammonoxidation products obtained under homogeneous conditions. Overall, a new ammonoxidation protocol was developed which does not require an external gas supply nor liquids or dissolved reactants. This opens the possibility for carrying out the lignin modification in closed continuous reactor systems, such as extruders. The new, facile solid-state protocol will hopefully help N-lignins to find more consideration as a fertilizing material and in soil-improving materials.

New cytochalasans from an endophytic Xylaria species associated with Costa Rican Palicourea elata (Rubiaceae).

Four new leucine-derived cytochalasans, possessing a 5,6,5,8-ring (1) and a 5,6,11-ring core (2-4), were isolated from a cultivated endophytic fungus Xylaria sp. strain WH2D4 (Xylariaceae). This fungus was isolated from leaves of the neotropical tree species Palicourea elata (Sw.) Borhidi (Rubiaceae) collected in Costa Rica. The chemical structures were determined by employing IR, MS as well as 1D- and 2D-NMR experiments. The stereochemistry at C-15 of compound 4 was determined by quantum calculations. The isolated compounds did not affect germination and growth of Trichoderma reesei and the opportunistic human fungal pathogen T. longibrachiatum.

Silviridoside: A New Triterpene Glycoside from Silene viridiflora with Promising Antioxidant and Enzyme Inhibitory Potential.

A new triterpene glycoside, silviridoside, was isolated from the aerial parts of Silene viridiflora (Caryophyllaceae) using different chromatographic techniques. The structure of silviridoside was comprehensively elucidated as 3-O-ß-D-galacturonopyranosyl-quillaic acid 28-O-ß-D-glucopyranosyl-(1→2)-[α-L-rhamnopyranosyl-(1→3)]-ß-D-fucopyranosyl ester by one- and two-dimensional nuclear magnetic resonance (NMR) spectroscopy and high-resolution mass spectrometry (HR-MS). Silviridoside showed promising antioxidant activity in different antioxidant assays such as 2,2-diphenyl-1-picrylhydrazyl (DPPH) (2.32 mg TE/g), 2,2'-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid) (ABTS) (1.24 mg TE/g), cupric-reducing antioxidant capacity (CUPRAC) (9.59 mg TE/g), ferric-reducing antioxidant power (FRAP) (5.13 mg TE/g), phosphomolybdenum (PHD) (0.28 mmol TE/g), and metal-chelating (MCA) (6.62 mg EDTA/g) assays. It exhibited a good inhibitory potential on acetylcholinesterase (AChE) (2.52 mg GALAE/g), butyrylcholinesterase (BChE) (7.16 mg GALAE/g), α-amylase (0.19 mmol ACAE/g), α-glucosidase (1.21 mmol ACAE/g), and tyrosinase (38.83 mg KAE/g). An in silico evaluation of the pharmacodynamic, pharmacokinetic, and toxicity properties of silviridoside showed that the new compound exhibited reasonable pharmacodynamic and pharmacokinetic properties without any mutagenic effect, but slight toxicity. Thus, it could be concluded that silviridoside could act as a promising lead drug for pharmaceutical and nutraceutical developments to combat oxidative stress and various disorders, but a future optimization is necessary.

Polaramycin B, and not physical interaction, is the signal that rewires fungal metabolism in the Streptomyces-Aspergillus interaction.

Co-culturing the bacterium Streptomyces rapamycinicus and the ascomycete Aspergillus nidulans has previously been shown to trigger the production of orsellinic acid (ORS) and its derivates in the fungal cells. Based on these studies it was assumed that direct physical contact is a prerequisite for the metabolic reaction that involves a fungal amino acid starvation response and activating chromatin modifications at the biosynthetic gene cluster (BGC). Here we show that not physical contact, but a guanidine containing macrolide, named polaramycin B, triggers the response. The substance is produced constitutively by the bacterium and above a certain concentration, provokes the production of ORS. In addition, several other secondary metabolites were induced by polaramycin B. Our genome-wide transcriptome analysis showed that polaramycin B treatment causes downregulation of fungal genes necessary for membrane stability, general metabolism and growth. A compensatory genetic response can be observed in the fungus that included upregulation of BGCs and genes necessary for ribosome biogenesis, translation and membrane stability. Our work discovered a novel chemical communication, in which the antifungal bacterial metabolite polaramycin B leads to the production of antibacterial defence chemicals and to the upregulation of genes necessary to compensate for the cellular damage caused by polaramycin B.

High-Resolution Profiling of the Functional Heterogeneity of Technical Lignins.

In technical lignins, functionality is strongly related to molar mass. Hence, any technical lignin exhibits concurrent functionality-type distribution (FTD) along its molar mass distribution (MMD). This study combined preparative size-exclusion chromatography with offline characterizations to acquire highly resolved profiles of the functional heterogeneity of technical lignins, which represent crucial information for their material use. The shape of these profiles showed considerable dissimilarity between different technical lignins and followed sigmoid trends. Determining the dispersity in functionality (DF) of lignins via their FTD revealed a rather homogeneous distribution of their functionalities (DF of 1.00-1.21). The high resolution of the acquired profiles of functional heterogeneity facilitated the development of a robust calculation method for the estimation of functional group contents of lignin fractions based simply on their MMD, an invaluable tool to simulate the effects of intended purification processes. Moreover, a more thorough evaluation of separations based on functionality becomes accessible.

A general solvent system for the analysis of lignosulfonates by 31P NMR.

31P nuclear magnetic resonance (NMR) spectroscopy is the most common and most accurate analytical method to quantitatively determine the hydroxy group contents of technical lignins. However, for lignosulfonates, liquid-state NMR analysis is often limited due to solubility problems in commonly used solvent systems, which may arise from the broad range of lignosulfonates from different wood sources, pulping conditions, and purification procedures used in biorefineries. Finding a suitable solvent system is even more difficult for chemically modified or fractionated lignosulfonates. In this study, a novel and fast approach for the solubilization of genuine, modified, and fractionated lignosulfonates and subsequent quantitative analysis of hydroxy groups by 31P NMR after derivatization with 2-chloro-4,4,5,5-tetramethyl-1,3,2-dioxaphospholane is presented. The implementation of the ionic liquid 1-ethyl-3-methylimidazolium chloride [emim]Cl to the already validated and commonly used DMF/pyridine solvent system caused complete solubility of previously insoluble samples, especially in the case of hard-to-dissolve ammonoxidized lignosulfonates. The applicability, accuracy, and robustness of the novel solvent system for 31P NMR analysis were comprehensively investigated with lignin model compounds and commercial lignosulfonates, including otherwise insoluble, real-world lignosulfonate specimens. The results were compared to the conventional DMF/pyridine solvent system. With the novel solvent system in hand, a much larger number of different lignosulfonates can be analyzed. In particular, the hydroxy group contents of ammonoxidized lignosulfonates were determined for the first time directly by 31P liquid-state NMR.

Luteapyrone, a Novel Æ´-Pyrone Isolated from the Filamentous Fungus Metapochonia lutea.

In the process of screening for new bioactive microbial metabolites we found a novel Æ´-pyrone derivative for which we propose the trivial name luteapyrone, in a recently described microscopic filamentous fungus, Metapochonia lutea BiMM-F96/DF4. The compound was isolated from the culture extract of the fungus grown on modified yeast extract sucrose medium by means of flash chromatography followed by preparative HPLC. The chemical structure was elucidated by NMR and LC-MS. The new compound was found to be non-cytotoxic against three mammalian cell lines (HEK 263, KB-3.1 and Caco-2). Similarly, no antimicrobial activity was observed in tested microorganisms (gram positive and negative bacteria, yeast and fungi).

Lignin Resists High-Intensity Electron Beam Irradiation.

The electron beam irradiation (EBI) of native lignin has received little attention. Thus, its potential use in lignin-based biorefineries is not fully understood. EBI was applied to selected lignin samples and the structural and chemical changes were analyzed, revealing the suitability, limitations, and potential purpose of EBI in wood biorefineries. Isolated milled wood, kraft, and sulfite lignin from beech and eucalyptus were subjected to up to 200 kGy of irradiation. The analysis included gel permeation chromatography for molar masses, heteronuclear single quantum coherence (HSQC)- and 31P NMR and headspace gas chromatography-mass spectrometry for functional groups, and thermogravimetric analysis for thermal stability. Most samples resisted irradiation. Subtle changes occurred in the molecular weight distribution and thermal stability of milled wood lignin. EBI was found to be a suitable pretreatment method for woody biomass if the avoidance of lignin condensation and chemical modification is a high priority.

Polyphasic Approach Utilized for the Identification of Two New Toxigenic Members of Penicillium Section Exilicaulis, P. krskae and P. silybi spp. nov.

Two new species, Penicillium krskae (isolated from the air as a lab contaminant in Tulln (Austria, EU)) and Penicillium silybi (isolated as an endophyte from asymptomatic milk thistle (Silybum marianum) stems from Josephine County (Oregon, USA)) are described. The new taxa are well supported by phenotypic (especially conidial ornamentation under SEM, production of red exudate and red pigments), physiological (growth at 37 °C, response to cycloheximide and CREA), chemotaxonomic (production of specific extrolites), and multilocus phylogenetic analysis using RNA-polymerase II second largest subunit (RPB2), partial tubulin (benA), and calmodulin (CaM). Both new taxa are resolved within the section Exilicaulis in series Restricta and show phylogenetic affiliation to P. restrictum sensu stricto. They produce a large spectrum of toxic anthraquinoid pigments, namely, monomeric anthraquinones related to emodic and chloremodic acids and other interesting bioactive extrolites (i.e., endocrocin, paxilline, pestalotin, and 7-hydroxypestalotin). Of note, two bianthraquinones (i.e., skyrin and oxyskyrin) were detected in a culture extract of P. silybi. Two new chloroemodic acid derivatives (2-chloro-isorhodoptilometrin and 2-chloro-desmethyldermoquinone) isolated from the exudate of P. krskae ex-type culture were analyzed by nuclear magnetic resonance (NMR) and liquid chromatography-mass spectrometry (LC-MS).

Comparative hydrolysis analysis of cellulose samples and aspects of its application in conservation science.

Knowledge about the carbohydrate composition of pulp and paper samples is essential for their characterization, further processing, and understanding the properties. In this study, we compare sulfuric acid hydrolysis and acidic methanolysis, followed by GC-MS analysis of the corresponding products, by means of 42 cellulose and polysaccharide samples. Results are discussed and compared to solid-state NMR (crystallinity) and gel permeation chromatography (weight-averaged molecular mass) data. The use of the hydrolysis methods in the context of cellulose conservation science is evaluated, using e-beam treated and artificially aged cellulose samples. SUPPLEMENTARY INFORMATION: The online version contains supplementary material available at 10.1007/s10570-021-04048-6.

Sulfuric Acid-Catalyzed Dehydratization of Carbohydrates for the Production of Adhesive Precursors.

Carbohydrates and hexose-derived 5-hydroxymethylfurfural (5-HMF) are platform chemicals for the synthesis of sustainable binders. New, greener approaches aim at the development of production systems, which minimize process steps and avoid organic solvents or other auxiliaries that could interfere with subsequent resin synthesis. In our work, carbohydrate solutions rich in 5-hydroxymethylfurfural (5-HMF) were produced using a continuous-flow microreactor and diluted H2SO4 as the catalyst. After optimization of the process conditions (temperature, reaction time, catalyst content), a 5-HMF yield of 49% was obtained at a low reaction time of 0.6 min and a catalyst concentration of 1% at 175 °C and 17 bar pressure. Extensive rehydration of the product was avoided by efficient immediate cooling of the reaction solution. The stability of the reaction system was improved by increasing the inner diameter of the capillary in the flow reactor to 2 mm. Advantageously, the obtained reaction mixtures are used directly as precursors in the development of sustainable binder systems, without the need of additional purification, filtration, or extraction steps.

Cannabinoids from inflorescences fractions of Trema orientalis (L.) Blume (Cannabaceae) against human pathogenic bacteria.

BACKGROUND: Cannabinoids; tetrahydrocannabinol (THC), cannabidiol (CBD) and cannabinol (CBN), might show antibacterial activity. Trema orientalis is a species in the Cannabaceae that is closely related to Cannabis through plastome phylogenetic evidence. This species is widely distributed throughout tropical Asia and is used as traditional medicine, particularly for the treatment of infectious diseases. However, no studies on the antibacterial activity of cannabinoid-containing inflorescences extracts are available. Thus, the aim of this study was to determine cannabinoid content and antibacterial activity of inflorescences fractions from T. orientalis native to Thailand. METHODS: We hypothesized that inflorescences from T. orientalis might display cannabinoids similar to Cannabis because of their close taxonomic relationship. We extracted the mature inflorescences and infructescence of T. orientalis in three disparate populations from different Thailand floristic regions. Extractions were subsequently partitioned into hydrophilic and lipophilic fractions using distilled water and chloroform. The lipophilic extracts were further fractionated by the column chromatography with gradient elution and analyzed by gas chromatography-mass spectrometry (GC-MS). Characterized cannabinoids were used in bioassays with multidrug-resistance bacteria. RESULTS: Lipophilic extracts and fractions of inflorescences from all Thailand floristic regions consistently displayed cannabinoids (THC, CBD and CBN) in various quantities. These extracts exhibited inhibitory activity for Staphylococcus aureus, Pseudomonas aeruginosa, and Acinetobacter baumannii strains with minimum inhibitory concentration values varying from 31.25 to 125 µg/mL. CONCLUSION: Our study is the first to report cannabinoid detection in extracts from inflorescences of T. orientalis, a species in the Cannabaceae. These extracts and their fractions containing cannabinoids showed pronounced antibacterial activity. The use of analytic methods also demonstrated reproducible cannabinoid extraction.

Chemical constituents of Clausena lenis.

Phytochemical examination of Clausena lenis Drake (Rutaceae), collected in Thailand, led to the isolation of seven coumarins, four furoquinolines, two amides, and one flavonoid glycoside. Four of these compounds, one coumarine derivative named as gravelliferone A (3), two furoquinoline derivatives (kokusagenin A (8) and B (9)) and one amide, clausenalansamide H (13), are reported for the first time. Compound 3 was isolated from the root bark, compound 8 from the stem bark and compounds 9 and 13 from the leaves. The molecular structures of all isolated compounds were established by means of NMR experiments combined with mass spectrometry. Preliminary tests of the lipophilic stem bark extract against various human pathogenic bacteria strains revealed promising effects against Staphylococcus aureus ATCC 43300.

On nitrogen fixation and "residual nitrogen content" in cellulosic pulps.

Cellulosic material is capable of permanently retaining nitrogen compounds (mostly having amino functions), which is reflected in a residual nitrogen content (in the low per mille range to the low percent range) of some pulps and certain lab samples. Merely adsorptively bound compounds can be removed by mild acidic washing, but part of the nitrogen seems to be resistant and very tightly bound, and thus not accessible for removal by washing. Tertiary and aromatic amines are not retained in this way, but only primary and secondary amines. There is only a weak correlation between the "firmly bound nitrogen" and the carbonyl content in cellulosics (because of oxidative damage), so that possible aminal, Schiff base and enamine structures can hardly be relevant as major nitrogen sources. However, there is a very good linear correlation between the ISO brightness (chromophore content) in aged pulps and the residual nitrogen content. In particular the concentration of the cellulosic key chromophore 2,5-dihydroxy-[1,4]-benzoquinone (DHBQ) determines the permanent N-binding capacity of the pulp. DHBQ reacts very readily with primary and secondary amines under ambient conditions to 2,5-diamino-substituted [1,4]-benzoquinones, which have very low solubility (because of zwitterionic resonance contributions) and thus remain on/in the pulp. Examples of nitrogen fixation in pulps are the binding of piperidine (a common amine catalyst in derivatization reactions), amine degradation products of the cellulose solvent NMMO, dimethylamine in materials processed from the cellulose solvent DMAc/LiCl, imidazole (a degradation product of 1-alkyl-3-methylimidazolium ionic liquids), and of amino groups in proteins after enzymatic treatment. The nature of the respective DHBQ-amine addition compound has been verified by complete structure determination.